2423 Powder Vacuum Receiver

The Series³ 2423 Powder Vacuum Receiver is designed to handle free flowing granular, powder, regrind and pelletized materials. It features a large filter area with automatic cleaning for fine powders. Each receiver has a stainless steel check valve to allow multiple receivers to draw material from a common conveying line. PVC compound is an example of a type of material that can be conveyed in the 2423 receiver.

Series 2423 Powder Vacuum Receiver Overview

• Available with carbon steel construction with epoxy coated interior and painted enamel on the exterior or with 304 stainless steel material contact.
•  The 2423 powder receiver has a large filter cartridge with 50-square feet of spunbond polyester media. It is automatically cleaned with bursts of compressed air.
• 60 degree hopper with 10-inch gravity discharge gate with white Neoprene seal.
• Band clamps for quick body section separation.
• 3-inch tangential inlet with stainless steel check valve.
• 3-inch air control valve.
• 22-inch diameter housing.
• Ideal for conveying PVC compound.

Series 2423 Powder Receiver Features

• 3-inch air control valve
• 22-inch diameter housing
• 3-inch tangential inlet with stainless steel check valve
• Available with carbon steel construction with epoxy coated interior and painted enamel on the exterior or with 304 stainless steel material contact
• Band clamps for quick body section separation
• 60° hopper with 10-inch gravity discharge gate with white Neoprene seal

Powder Mounting Ring Features

• Carbon steel or 304 stainless steel construction, 24-in. high.
• Flanged extension with 360o gate access by removing a 12 oz. P.T.F.E. filter cloth sleeve.
• Flanged bolt pattern allows for receiver position in 26° increments.

Installation Kits

The Series3 2400 Installation Kits make installing the Series3 2400 system easier and more economical. Each kit includes all the necessary cable and “T” connectors to connect receivers to the Central PLC Controller. The cable comes pre-terminated with “quick-connect” plugs to accommodate easy installation without tools.

The “T” connectors act as a junction box for each receiver’s cable. Using these kits will reduce the chance for incorrect wiring, enabling a trouble-free installation and start-up.

Solid-State Receiver Panel

Each receiver is equipped with a solid-state control panel with quick connectors to simplify the connection to the central system controller. Via commands from the Central Controller, it actuates the solenoids for the fill valve, bag pulse and inlets.

A clear cover allows visual verification that the receiver is calling for material, and a switch lets the operator take the unit off-line

Spec Sheets require Adobe’s Acrobat Reader to view. If you are already logged in with your Premier Pneumatics account, you will automatically be redirected to the download page. If not, you will be asked to provide us with some basic information prior to downloading.